Beryllium-Free Non-Sparking Air Hammer Punch

Beryllium-Free Non-Sparking Air Hammer Punch

$139.00

Beryllium-free non-sparking air hammer punch manufactured by Iron Ax. Designed for Enviro Rack fuel tank puncturing and other applications where a spark-resistant air-hammer punch is required.

SKU: ER-NSP-C630 Category:

Description

This Beryllium-Free Non-Sparking Air Hammer Punch is manufactured by Iron Ax

This punch is designed as a safer alternative to beryllium-copper punches for applications where the tool may need to be machined, dressed, or resharpened. Because it contains no beryllium, the tip can be periodically sharpened or dressed without creating the same beryllium exposure concerns associated with beryllium-copper tools.

This punch is intended for use with compatible pneumatic air hammers and is especially suited for Enviro Rack fuel tank puncturing applications where a non-sparking punch is required.

Key Features

  • Beryllium-free
  • Machined from C63000 nickel aluminum bronze
  • Non-sparking / spark-resistant material
  • Designed for pneumatic air hammer use
  • Can be dressed or resharpened as needed
  • Made by Iron Ax
  • Recommended replacement punch for Enviro Rack operators

Specifications

Material: C63000 nickel aluminum bronze
Material spec: AMS 4640 / ASTM B150 HR50
Beryllium-free: Yes
Tool type: Air hammer punch
Application: Enviro Rack fuel tank puncturing / spark-resistant punching applications
Shank: 10 mm / .401 style air hammer shank, if this matches your final machined design
Manufacturer: Iron Ax 
Price: $139.00 each

Important Safety Note

Use this section on the product page:

Important: This tool is made from beryllium-free nickel aluminum bronze and is designed for non-sparking / spark-resistant applications. No tool should be considered spark-proof under every possible condition. Always follow your company’s safety procedures when working around fuel vapors, flammable liquids, or hazardous environments.

Inspect the punch regularly. Dress, sharpen, or replace the punch if excessive mushrooming, deformation, cracking, or wear occurs.

Maintenance Note

Because this punch is made from a non-sparking bronze alloy, the tip may mushroom or wear with extended use. This is normal for non-sparking tools. The tip can be dressed or resharpened periodically to extend service life. Avoid overheating the material when grinding or sharpening.

Related products